aluminum electrolytic capacitor/fb design, specifications are subject to change without notice. ask factory for technical specifications before purchase and /or u se. whenever a doubt about safety arises from this product, please inform us immediately for technical consulation without fail. ? ee75 ? fb a series: type : endurance: 105 c 1000 h( f 5 to f 8) 105 c 2000 h( f 10 to f 18) low impedance -55 to + 105 c 10 to 50 v .dc 0.47 to 10000 f 20 % (120hz/+20 c) i < 0.01 cv or 3( a) after 2 minutes frequency correction factor for ripple current w.v. (v.dc) 60 120 1k 10k 100 k frequency(hz) 0.55 0.65 0.85 0.90 1.0 japan malaysia china body dia. f d body length l lead dia. f d lead space p 20 to25 30 to 40 0.5 0.5 0.6 0.6 0.6 0.8 0.8 0.8 2.0 2.5 3.5 5.0 5.0 5.0 7.5 7.5 5 6.3 8 10 12.5 16 18 10 to 50 cap. (f) 0.47 to 330 390 to 1000 1200 to 2200 2700 to 10000 0.70 0.75 0.90 0.95 1.0 0.75 0.80 0.90 0.95 1.0 0.80 0.85 0.95 1.00 1.0 (> 6.3mmdia) l l < 16:l+1.0 max f d 0.05 14 min 3 min f d+0.5 max f 10 < p 0.5 f d+0.5 max f 8> p 0.5 l > 20:l+2.0 max radial lead type features category temp. range rated w.v. range nominal cap. range capacitance tolerance dc leakage current dissipation factor after following life test with dc voltage and +1052 c ripple current value applied (the sum of dc and ripple peak voltage shall not exceed the rated working voltage), the capacitors shall meet the limits specified bellow. duration : 1000 hours ( f 5 to 8), 2000hours ( f 10 to 18) post test requirementat +20 c endurance capacitance change d.f. dc leakage current 20% of initial measured value < 200 % of initial specified value < initial specified value shelf life after storage for 1000hours at +1052 c with no voltage applied and then being stabilized at +20 c, capacitors shall meet the limits specified in ?endurance?.(with voltage treatment) dimensions in mm (not to scale) p.v.c. sleeve vent specifications please see the attached standard products list mar. 2005 downloaded from: http:///
aluminium electrolytic capacitors/fb ? ee76 ? design, specifications are subject to change without notice. ask factory for technical specifications before purchase and/or u se. whenever a doubt about safety arises from this product, please inform us immediately for technical consulation without fail. when requesting t aped product, please put the letter "b" or "h" between the "( )". lead wire pitch b=5mm, 7.5mm. h=2.5mm.the taping dimentions are explained on p.25 of our catalog. please use it as a reference guide. (mm) (mm) (mm) (pcs) (pcs) (f) (mm) (mm) (hours) ? b ? h lead space part no. specification dia. l ength taping case size cap. (20%) lead dia. w.v. straight min. packaging q'ty standard products taping taping ripple current (100khz) (+105 c) lead length straight leads imped- ance (100 khz) (+2 0 ? c) (mm) (m a ) ( w ) 82 5 11 160 1.30 1000 0.5 2.0 5.0 2.5 eeufb1a820( ) 200 2000 120 5 15 210 0.920 1000 0.5 2.0 5.0 2.5 eeufb1a121( ) 200 2000 180 6.3 11.2 260 0.590 1000 0.5 2.5 5.0 2.5 eeufb1a181( ) 200 2000 270 6.3 15 350 0.40 1000 0.5 2.5 5.0 2.5 eeufb1a271( ) 200 2000 330 8 11.5 400 0.330 1000 0.6 3.5 5.0 eeufb1a331( ) 200 1000 390 10 12.5 520 0.260 2000 0.6 5.0 5.0 eeufb1a391( ) 200 500 470 8 15 500 0.240 1000 0.6 3.5 5.0 eeufb1a471( ) 200 1000 560 8 20 650 0.180 1000 0.6 3.5 5.0 eeufb1a561l( ) 200 1000 10 16 640 0.210 2000 0.6 5.0 5.0 eeufb1a561( ) 200 500 820 10 20 860 0.130 2000 0.6 5.0 5.0 eeufb1a821( ) 200 500 1200 10 25 1000 0.110 2000 0.6 5.0 5.0 eeufb1a122 200 1500 10 30 1150 0.090 2000 0.6 5.0 eeufb1a152l 100 1800 12.5 20 1120 0.086 2000 0.6 5.0 5.0 eeufb1a182( ) 200 500 10 2200 12.5 25 1350 0.070 2000 0.6 5.0 5.0 eeufb1a222( ) 200 500 2700 12.5 30 1560 0.062 2000 0.8 5.0 eeufb1a272 100 3300 12.5 35 1780 0.050 2000 0.8 5.0 eeufb1a332l 100 16 20 1380 0.072 2000 0.8 7.5 7.5 eeufb1a332( ) 100 250 3900 12.5 40 1980 0.043 2000 0.8 5.0 eeufb1a392l 100 16 25 1600 0.060 2000 0.8 7.5 7.5 eeufb1a392( ) 100 250 18 20 1600 0.062 2000 0.8 7.5 7.5 eeufb1a392s( ) 100 250 4700 16 31.5 1850 0.052 2000 0.8 7.5 eeufb1a472 100 18 25 1860 0.052 2000 0.8 7.5 7.5 eeufb1a472s( ) 100 250 6800 16 35.5 2040 0.044 2000 0.8 7.5 eeufb1a682l 100 18 31.5 2050 0.046 2000 0.8 7.5 eeufb1a682 50 8200 16 40 2320 0.036 2000 0.8 7.5 eeufb1a822l 100 18 35.5 2250 0.040 2000 0.8 7.5 eeufb1a822 50 10000 18 40 2470 0.036 2000 0.8 7.5 eeufb1a103 50 56 5 11 160 1.30 1000 0.5 2.0 5.0 2.5 eeufb1c560( ) 200 2000 82 5 15 210 0.920 1000 0.5 2.0 5.0 2.5 eeufb1c820( ) 200 2000 120 6.3 11.2 260 0.590 1000 0.5 2.5 5.0 2.5 eeufb1c121( ) 200 2000 180 6.3 15.0 350 0.40 1000 0.5 2.5 5.0 2.5 eeufb1c181( ) 200 2000 220 8 11.5 400 0.330 1000 0.6 3.5 5.0 eeufb1c221( ) 200 1000 270 10 12.5 520 0.260 2000 0.6 5.0 5.0 eeufb1c271( ) 200 500 330 8 15 500 0.240 1000 0.6 3.5 5.0 eeufb1c331l( ) 200 1000 16 390 10 16 640 0.210 2000 0.6 5.0 5.0 eeufb1c391( ) 200 500 470 8 20 650 0.180 1000 0.6 3.5 5.0 eeufb1c471( ) 200 1000 680 10 20 860 0.130 2000 0.6 5.0 5.0 eeufb1c681l( ) 200 500 820 10 25 1000 0.110 2000 0.6 5.0 5.0 eeufb1c821 200 1000 10 30 1150 0.090 2000 0.6 5.0 eeufb1c102 100 1200 12.5 20 1120 0.086 2000 0.6 5.0 5.0 eeufb1c122( ) 200 500 1500 12.5 25 1350 0.070 2000 0.6 5.0 5.0 eeufb1c152( ) 200 500 2200 12.5 30 1560 0.062 2000 0.8 5.0 eeufb1c222l 100 endur- ance mar. 2005 downloaded from: http:///
aluminium electrolytic capacitors/fb ? ee77 ? design, specifications are subject to change without notice. ask factory for technical specifications before purchase and/or u se. whenever a doubt about safety arises from this product, please inform us immediately for technical consulation without fail. 16 (mm) (mm) (mm) (pcs) (pcs) (f) (mm) (mm) (mm) (ma) ( w ) (v) (hours) ? b ? h lead space part no. specification dia. length taping case size cap. (20%) lead dia. w.v. straight min. packaging q'ty standard products taping taping ripple current (100khz) (+105 c) lead length imped- ance (100 khz) (+2 0 ? c) when requesting taped product, please put the letter "b" or "h" between the "( )". lead wire pitch b=5mm, 7.5mm. h=2.5mm. the taping dimentions are explained on p.33 of our catalog. please use it as a reference guide. straight leads 2200 16 20 1380 0.072 2000 0.8 7.5 7.5 eeufb1c222( ) 100 250 2700 12.5 35 1780 0.050 2000 0.8 5.0 eeufb1c272l 100 16 25 1600 0.060 2000 0.8 7.5 7.5 eeufb1c272( ) 100 250 3300 12.5 40 1980 0.043 2000 0.8 5.0 eeufb1c332l 100 500 18 20 1600 0.062 2000 0.8 7.5 7.5 eeufb1c332( ) 100 250 3900 16 31.5 1850 0.052 2000 0.8 7.5 eeufb1c392 100 18 25 1860 0.052 2000 0.8 7.5 7.5 eeufb1c392s( ) 100 250 4700 16 35.5 2040 0.044 2000 0.8 7.5 eeufb1c472l 100 18 31.5 2050 0.046 2000 0.8 7.5 eeufb1c472 50 5600 16 40 2320 0.036 2000 0.8 7.5 eeufb1c562 100 6800 18 35.5 2250 0.040 2000 0.8 7.5 eeufb1c682 50 8200 18 40 2470 0.036 2000 0.8 7.5 eeufb1c822 50 39 5 11 160 1.30 1000 0.5 2.0 5.0 2.5 eeufb1e390( ) 200 2000 56 5 15 210 0.920 1000 0.5 2.0 5.0 2.5 eeufb1e560( ) 200 2000 82 6.3 11.2 260 0.590 1000 0.5 2.5 5.0 2.5 eeufb1e820( ) 200 2000 120 6.3 15 350 0.40 1000 0.5 2.5 5.0 2.5 eeufb1e121( ) 200 2000 150 8 11.5 400 0.330 1000 0.6 3.5 5.0 eeufb1e151( ) 200 1000 180 10 12.5 520 0.260 2000 0.6 5.0 5.0 eeufb1e181( ) 200 500 220 8 15 500 0.240 1000 0.6 3.5 5.0 eeufb1e221( ) 200 1000 270 8 20 650 0.180 1000 0.6 3.5 5.0 eeufb1e271l( ) 200 1000 10 16 640 0.210 2000 0.6 5.0 5.0 eeufb1e271( ) 200 500 470 10 20 860 0.130 2000 0.6 5.0 5.0 eeufb1e471l( ) 200 500 560 10 25 1000 0.110 2000 0.6 5.0 5.0 eeufb1e561 200 680 10 30 1150 0.090 2000 0.6 5.0 eeufb1e681 100 820 12.5 20 1120 0.086 2000 0.6 5.0 5.0 eeufb1e821( ) 200 500 25 1000 12.5 25 1350 0.070 2000 0.6 5.0 5.0 EEUFB1E102( ) 200 500 1500 12.5 30 1560 0.062 2000 0.8 5.0 eeufb1e152l 100 16 20 1380 0.072 2000 0.8 7.5 7.5 eeufb1e152( ) 100 250 1800 12.5 35 1780 0.050 2000 0.8 5.0 eeufb1e182l 100 16 25 1600 0.060 2000 0.8 7.5 7.5 eeufb1e182( ) 100 250 2200 12.5 40 1980 0.043 2000 0.8 5.0 eeufb1e222l 100 18 20 1600 0.062 2000 0.8 7.5 7.5 eeufb1e222( ) 100 250 2700 16 31.5 1850 0.052 2000 0.8 7.5 eeufb1e272 100 18 25 1860 0.052 2000 0.8 7.5 7.5 eeufb1e272s( ) 100 250 3300 16 35.5 2040 0.044 2000 0.8 7.5 eeufb1e332l 100 18 31.5 2050 0.046 2000 0.8 7.5 eeufb1e332 50 3900 16 40 2320 0.036 2000 0.8 7.5 eeufb1e392l 100 18 35.5 2250 0.040 2000 0.8 7.5 eeufb1e392 50 4700 18 40 2470 0.036 2000 0.8 7.5 eeufb1e472 50 27 5 11 160 1.30 1000 0.5 2.0 5.0 2.5 eeufb1v270( ) 200 2000 35 39 5 15 210 0.920 1000 0.5 2.0 5.0 2.5 eeufb1v390( ) 200 2000 56 6.3 11.2 260 0.590 1000 0.5 2.5 5.0 2.5 eeufb1v560( ) 200 2000 endur- ance mar. 2005 downloaded from: http:///
aluminium electrolytic capacitors/fb ? ee78 ? design, specifications are subject to change without notice. ask factory for technical specifications before purchase and/or u se. whenever a doubt about safety arises from this product, please inform us immediately for technical consulation without fail. 3550 when requesting taped product, please put the letter "b" or "h" between the "( )". lead wire pitch b=5mm, 7.5mm. h=2.5mm.the taping dimentions are explained on p.25 of our catalog. please use it as a reference guide. (mm) (mm) (mm) (pcs) (pcs) (f) (mm) (mm) (hours) ? b ? h lead space part no. specification dia. length taping case size cap. (20%) lead dia. w.v. straight min. packaging q'ty standard products taping taping ripple current (100khz) (+105 c) lead length straight leads imped- ance (100 khz) (+2 0 ? c) (m a ) ( w ) 82 6.3 15 350 0.40 1000 0.5 2.5 5.0 2.5 eeufb1v820( ) 200 2000 100 8 11.5 400 0.330 1000 0.6 3.5 5.0 eeufb1v101( ) 200 1000 120 10 12.5 520 0.260 2000 0.6 5.0 5.0 eeufb1v121( ) 200 500 150 8 15 500 0.240 1000 0.6 3.5 5.0 eeufb1v151( ) 200 1000 180 10 16 640 0.210 2000 0.6 5.0 5.0 eeufb1v181( ) 200 500 220 8 20 650 0.180 1000 0.6 3.5 5.0 eeufb1v221( ) 200 1000 330 10 20 860 0.130 2000 0.6 5.0 5.0 eeufb1v331l( ) 200 500 390 10 25 1000 0.110 2000 0.6 5.0 5.0 eeufb1v391 200 470 10 30 1150 0.090 2000 0.6 5.0 eeufb1v471 100 560 12.5 20 1120 0.086 2000 0.6 5.0 5.0 eeufb1v561( ) 200 500 680 12.5 25 1350 0.070 2000 0.6 5.0 5.0 eeufb1v681( ) 200 500 1000 12.5 30 1560 0.062 2000 0.8 5.0 eeufb1v102l 100 16 20 1380 0.072 2000 0.8 7.5 7.5 eeufb1v102( ) 100 250 1200 12.5 35 1780 0.050 2000 0.8 5.0 eeufb1v122l 100 16 25 1600 0.060 2000 0.8 7.5 7.5 eeufb1v122( ) 100 250 1500 12.5 40 1980 0.043 2000 0.8 5.0 eeufb1v152l 100 500 18 20 1600 0.062 2000 0.8 7.5 7.5 eeufb1v152( ) 100 250 1800 16 31.5 1850 0.052 2000 0.8 7.5 eeufb1v182 100 18 25 1860 0.052 2000 0.8 7.5 7.5 eeufb1v182s( ) 100 250 2200 16 35.5 2040 0.044 2000 0.8 7.5 eeufb1v222l 100 18 31.5 2050 0.046 2000 0.8 7.5 eeufb1v222 50 2700 16 40 2320 0.036 2000 0.8 7.5 eeufb1v272l 100 18 35.5 2250 0.040 2000 0.8 7.5 eeufb1v272 50 3300 18 40 2470 0.036 2000 0.8 7.5 eeufb1v332 50 0.47 5 11 18 47.0 1000 0.5 2.0 5.0 2.5 eeufb1hr47( ) 200 2000 1 5 11 30 22.0 1000 0.5 2.0 5.0 2.5 eeufb1h1r0( ) 200 2000 2.2 5 11 45 10.0 1000 0.5 2.0 5.0 2.5 eeufb1h2r2( ) 200 2000 3.3 5 11 55 6.70 1000 0.5 2.0 5.0 2.5 eeufb1h3r3( ) 200 2000 4.7 5 11 70 4.70 1000 0.5 2.0 5.0 2.5 eeufb1h4r7( ) 200 2000 6.8 5 11 80 3.20 1000 0.5 2.0 5.0 2.5 eeufb1h6r8( ) 200 2000 10 5 11 100 2.20 1000 0.5 2.0 5.0 2.5 eeufb1h100( ) 200 2000 18 5 11 160 1.30 1000 0.5 2.0 5.0 2.5 eeufb1h180( ) 200 2000 27 5 15 210 0.920 1000 0.5 2.0 5.0 2.5 eeufb1h270( ) 200 2000 39 6.3 11.2 260 0.590 1000 0.5 2.5 5.0 2.5 eeufb1h390( ) 200 2000 56 6.3 15 350 0.40 1000 0.5 2.5 5.0 2.5 eeufb1h560( ) 200 2000 68 8 11.5 400 0.330 1000 0.6 3.5 5.0 eeufb1h680( ) 200 1000 82 8 15 500 0.240 1000 0.6 3.5 5.0 eeufb1h820l( ) 200 1000 10 12.5 520 0.260 2000 0.6 5.0 5.0 eeufb1h820( ) 200 500 100 10 16 640 0.210 2000 0.6 5.0 5.0 eeufb1h101( ) 200 500 120 8 20 650 0.180 1000 0.6 3.5 5.0 eeufb1h121( ) 200 1000 180 10 20 860 0.130 2000 0.6 5.0 5.0 eeufb1h181l( ) 200 500 220 10 25 1000 0.110 2000 0.6 5.0 5.0 eeufb1h221 200 endur- ance mar. 2005 downloaded from: http:///
aluminium electrolytic capacitors/fb ? ee79 ? design, specifications are subject to change without notice. ask factory for technical specifications before purchase and/or u se. whenever a doubt about safety arises from this product, please inform us immediately for technical consulation without fail. 50 when requesting taped product, please put the letter "b" or "h" between the "( )". lead wire pitch b=5mm, 7.5mm. h=2.5mm. the taping dimentions are explained on p.25 of our catalog. please use it as a reference guide. (mm) (mm) (mm) (pcs) (pcs) (f) (mm) (mm) (hours) ? b ? h lead space part no. specification dia. length taping case size cap. (20%) lead dia. w.v. straight min. packaging q'ty standard products taping taping ripple current (100khz)(+105 c) lead length straight leads imped- ance (100 khz) (+2 0 ? c) (m a ) ( w ) (mm) 330 10 30 1150 0.090 2000 0.6 5.0 eeufb1h331l 100 12.5 20 1120 0.086 2000 0.6 5.0 5.0 eeufb1h331( ) 200 500 470 12.5 25 1350 0.070 2000 0.6 5.0 5.0 eeufb1h471( ) 200 500 560 12.5 30 1560 0.062 2000 0.8 5.0 eeufb1h561 100 680 12.5 35 1780 0.050 2000 0.8 5.0 eeufb1h681l 100 16 20 1380 0.072 2000 0.8 7.5 7.5 eeufb1h681( ) 100 250 820 12.5 40 1980 0.043 2000 0.8 5.0 eeufb1h821l 100 16 25 1600 0.060 2000 0.8 7.5 7.5 eeufb1h821( ) 100 250 18 20 1600 0.062 2000 0.8 7.5 7.5 eeufb1h821s( ) 100 250 1000 16 31.5 1850 0.052 2000 0.8 7.5 eeufb1h102 100 18 25 1860 0.052 2000 0.8 7.5 7.5 eeufb1h102s( ) 100 250 1200 16 35.5 2040 0.044 2000 0.8 7.5 eeufb1h122 100 1500 16 40 2320 0.036 2000 0.8 7.5 eeufb1h152l 100 18 31.5 2050 0.046 2000 0.8 7.5 eeufb1h152 50 1800 18 35.5 2250 0.040 2000 0.8 7.5 eeufb1h182 50 2200 18 40 2470 0.036 2000 0.8 7.5 eeufb1h222 50 endur- ance mar. 2005 downloaded from: http:///
|
